Products :: DC Motors :: Gearmotors :: Universal Motors :: DC Motor Controls :: Stock Motors, 
Gearmotors & Controls


Design/Engineering Assistance Industries Served Quality Assurance
Follow Us On: Facebook LinkedIn Twitter WordPress Goggle Plus
RAEIPC
Search Catalog 
      GO   
 Motors    DC Motor Controls
Motors > DC Motor Controls 
 

DC Motor Controls

Click on a Product to view details.

Request Information
SCR Series

Model SC-Low Cost SCR Controller

The model SC is a 115 VAC input 0-90 VDC output economical motor controller where good performance at very low cost is desired. The SC is rated for 5 Amps continuos output current and operates in a single direction. On-board potentiometers provide master speed control and smaller potentiometers are available to set min/max speed control limits. Fixed 200% current limit and transient protection round out this small rugged package. Great selection for open frame OEM speed control applications of permanent magnet DC motors.

910-3222-003

D130 - 1HP 220VAC SCR Regenerative DC Drive

The IPC Automation model D130 220 VAC Input , 0-180 VDC variable-speed output SCR motor drive provides four-quadrant half-wave control of DC motors in a variety of applications. Low cost design can be used in dancer-type, wire payout, web tension or other economical motor drive applications.

Incorporating traditional IPC quality in a rugged package, the D130 offers smooth adjustable acceleration, adjustable forward and reverse current limit, adjustable pot position, and many other features for specialized or ganged operation. Fast reversing operation provides quick response and power savings. Simple hook-up


910-3222-004

D130 - 1HP 110VAC SCR Regenerative DC Drive

The IPC Automation model D130 110 VAC Input, 0-90 VDC variable-speed output SCR motor drive provides four-quadrant half-wave control of DC motors in a variety of applications. Low cost design can be used in dancer-type, wire payout, web tension or other economical motor drive applications. Incorporating traditional IPC quality in a rugged package, the D130 offers smooth adjustable acceleration, adjustable forward and reverse current limit, adjustable pot position, and many other features for specialized or ganged operation. Fast reversing operation provides quick response and power savings. Simple hook-up.

910-3222-005

D130 - 2HP 220VAC SCR Regenerative DC Drive

The IPC Automation model D130 220 VAC Input, 0-180 VDC 2 HP variable-speed output SCR motor drive provides four-quadrant half-wave control of DC motors in a variety of applications. Low cost design can be used in dancer-type, wire payout, web tension or other economical motor drive applications. Incorporating traditional IPC quality in a rugged package, the D130 offers smooth adjustable acceleration, adjustable forward and reverse current limit, adjustable pot position, and many other features for specialized or ganged operation. Fast reversing operation provides quick response and power savings. Simple hook-up.

910-3222-009

C192 - 115VAC Input - 90V DC Reversable SCR Motor Control 3A

The IPC C192 reversable motor controller is a 115 VAC Input, 0-90 VDC output variable speed motor controller designed to work with shunt-wound field DC motors and gearmotors operating in a two directions. Features include: current limit (factory set), forward/reverse direction switch and on-board fusing. 5 Amp DC continuous rating. Uses 3-wire speed potentiometer (customer supplied). Transient protection. Small footprint saves valuable space.

910-5222-004

D188 - 220VAC Single-Phase SCR Power Controller 30A

The IPC D188 is a single-phase SCR power controller which offers variable-voltage/phase-angle control for a variety of power control applications. Fully-isolated all-digital firing is immune to AC line distortions, RF and noise. Special circuitry prevents half-wave voltage doubling. These rugged controllers feature many standard features such as soft-start, voltage or current control input, AC or DC output, open or closed-loop operation and a variety of AC or DC feedback options. 4-20 ma current input with offset and bias adjustments. Adjustable current limit. 30 A continuous output rating. (Higher currents or other voltages on request) Also available as a trigger-only package (uses customer supplied power section).

D160w-o-cover

D160 - 230/460VAC Three-Phase SCR Power Controller 30A

The IPC D160 is a three-phase SCR power controller which offers variable-voltage phase-angle control for a variety of applications. Fully-isolated all-digital firing is immune to AC line distortions, RF and noise. These rugged controllers feature many standard features such as soft-start, voltage or current control input, AC or DC output, open or closed-loop operation and a variety of AC or DC feedback options. 4-20 ma current input with offset and bias adjustments. Adjustable current limit. 30 A continuous output rating. (Higher currents or other voltages on request) Also available as a trigger-only package (uses customer supplied power section).

910-5252-021

D1000 - 110/230VAC Single Phase SCR Power Controller 30A

The IPC D1000 low cost single-phase SCR power controller offers variable-voltage phase-angle control for a variety of applications. All-digital firing is immune to AC line distortions, RF and noise. These rugged controllers feature many standard features such as soft-start, voltage or current control input, AC or DC output, open or closed-loop operation and a variety of AC or DC feedback options. 4-20 ma current input with offset and bias adjustments. Adjustable current limit. 30 Amp DC continuous rating. (Higher currents or other voltages on request) Small footprint saves valuable space. Simple hookup.

910-3522-026

RHV-115VAC Input Variable-Speed DC PWM Motor Speed Control 5A

The IPC Automation RHV PWM 115 VAC Input, variable-speed PWM output DC drive provides efficient control of permanent magnet motors and gearmotors used in many types of applications and devices for motor operation in a single direction. Incorporating traditional IPC quality in a compact rugged package, the RHV offers smooth and linear acceleration, adjustable maximum speed, automatic current limit and quiet operation in a very compact package.

Uses an external potentiometer for controlling motor speed. Simplified hook-up uses common economical 0.250" "fast-on" connectors. Use of a PWM controller allows increased motor ratings of up to 78% as compared to similar SCR based controller designs.


910-3522-022

RLVS1215 - 12VDC Single Direction PWM DC Drive 15A

The IPC RLVS 1215 and RLVS 2415 controllers are designed to provide simple and very efficient control of 12 and 24-volt battery powered permanent magnet DC motors and gearmotors operating in a single direction. These controllers offer smooth, silent and cost-effective control of motor speed. High-speed FET PWM (Pulse Width Modulated) output design.

910-3522-023

RLVS2415 - 24VDC Single Direction PWM DC Drive 15A

The IPC RLVS 2415 controllers are specifically designed to provide simple and efficient control of battery powered permanent magnet DC motors and gearmotrs operating in a single direction. These controllers offer smooth, silent and cost effective control of motor speed. High-speed FET output PWM (Pulse Width Modulation) design.

RLVS-12-F-R

RLVS1215F/R - 12VDC Reversing PWM DC Drive 15A

The IPC RLVS1215F/R controllers are specifically designed to provide simple and efficient control of battery powered permanent magnet DC motors and gearmotors operating in two directions. Intelligent reversing clamps speed signal to zero on change of direction. These controllers offer smooth, silent and cost-effective control of motor speed. High-speed FET output PWM (Pulse Width Modulation) design. 15A output 20A peak. (Higher currents on request). Can be epoxy encapsulated for harsh environments.

RLVS-12-F-R

RLVS2415F/R - 24VDC Reversing PWM DC Drive 15A

The IPC RLVS2415F/R controllers are specifically designed to provide simple and efficient control of battery powered permanent magnet DC motors and gearmotors operating in two directions. Intelligent reversing clamps speed signal to zero on change of direction. These controllers offer smooth, silent and cost-effective control of motor speed. High-speed FET output PWM (Pulse Width Modulation) design. 15A output 20A peak. (Higher currents on request). Can be epoxy encapsulated for harsh environments.

Site created by Thomas Web Solutions
Company Name - Your Tagline Goes Here